Boat Transport Method

Boat will arrive by trailer

Boat will leave by trailer

Boat will arrive by water

Boat will leave by water

Rex Summer Valet Rack

Rex Winter Storage

If boat is new to Rex, please tell us more so we can assist you better

**providing previous service records will assist us in recommended services**

I acknowledge the information above, on the reverse side, and on the following service work order forms is correct. I authorize Rex Marine to repair service & commission my vessel and components. I wish to use this credit card as a method of payment to cover my repairs. This signed authorization allows Rex Marine Center to bill by card company for my work order upon completion of work *

Outboard Winterization Services

All prices below are labor only. All services are billed at a Labor Rate of $200.00/hr. Materials, sales tax, and a 1.50% environ- mental compliance charge are extra and will be applied accordingly. Work orders for services will be billed as work progresses and may be partially billed over several months time.

1.Adding factory recommended fuel conditioners, drain & replace gear lube, introduce anti-corrosion chemicals through carburetor or fuel injection systems to protect internal engine components and coat engine with rust preventative lubricant 2.Remove prop, clean & grease prop shaft, check satisfactory flow of cooling water, lubricate all grease fittings, verify normal gear shifting & steering, check gauges for proper indication, check belt & hoses, disconnect batteries and leave in boat 3.Change fuel filter, change oil and oil filter, (for Four Stroke models), replace external zincs and replace spark plugs, (unless owner declines). Internal power head anodes are additional and charged at time & material, when applicable.

TWO STROKE ENGINE (prices are per engine, materials are additional)

OB1CYLW 1 Cylinder 2.5—5hp - $300.00

OB2CYLW 2 Cylinder 6—25hp - $360.00

OB3CYLW 3 Cylinder 40—90hp - $400.00

OB4CYLW 4 Cylinder - $490.00

OB6EFIW 6 Cylinder 150—250hp - $600.00

OBMAX3W Optimax 3 Cylinder 75—115hp - $650.00

OBMAX6W Optimax 6 cylinder 135—225hp - $700.00

FOUR STROKE ENGINE (prices are per engine, materials are additional)

OB4S1CW 1 Cylinder carbureted 2.5—5hp - $319.00

OB2CYLW 2 Cylinder carbureted 6—15hp - $430.00

OB3CYLW 3 Cylinder (carb/EFI) - $500.00

OB4CYLW 4 Cylinder - $600.00

OB6EFIW 6 Cylinder - $725.00

OBMAX3W 4 Cylinder Verado 135— 200hp - $700.00

OBMAX6W 6 / 8Cylinder Verado 200—450hp - $800.00

OBMAX6W 10 / 12 Cyl Verado 350—600hp - $900.00 - $1100.00

Yamaha Four Stroke Electronic Fuel Injection Engines (materials additional)

OBY4EW 4 Cyl Yamaha 90hp-200hp - $625

OBY6EW6 Cyl Yamaha150hp-300hp - $755

OBY8EW 8 Cyl Yamaha 350hp-425hp - $855

Additional Services

OB40 Replace impeller assembly recommended every other year, new motors allow longer intervals (note many models require draining engine oil to enable this service) - Time & Materials

OB50 Clean thermostat housing, replace thermostat and gaskets (best to combine with OB40) - Time & Materials

ZNTT Replace trim tab anodes (zincs) - Time & Materials

ZNOB Replace engine internal powerhead anodes when equipped (zincs) - Time & Materials

PUMP Waste pump out (done automatically with any evidence of remaining waste to enable winterization) - $130

COMP01 Compression check (recommended for older engines, loss of power or performative issues) - Time & Materials

OBFOG Fog engine for winter storage only (included in preventive service above) - Time & Materials

Required (for winter storage at Rex) *

WI01 Winterize all systems (including domestic and saltwater systems) - Time & Materials

PR04 Recondition props as necessary - Time & Materials

HL06/DEP Power wash boat bottom & water recycling (required for dockage boats, not required for summer rack stored boats) - $7.00/ft

Shrink Wrap Services (Wrap to rail an additional $5.00/ft materials included (required for dark colored & painted hulls))

SW01 Shrink wrap boat up to 20’ (materials included) - $22.00/ft

SW02 Shrink wrap boat over 20’ and up to 10’ beam (materials included) - $27.00/ft

SW03 Shrink wrap boat up to 40’ and over 10’ beam (materials included) - $30.00/ft

SW04 Shrink wrap boat up to 50’ and over 10’ beam (materials included) - $33.00/ft

SW07 Boats with fly bridge,or T-tops (materials included) - $150.00

SW08 Remove bimini, enclosures, antennas, etc. as necessary to enable shrink wrapping - Hourly Rate

SW09 Install zippered access door after shrinkwrap - $60.00/ft

Canvas & Upholstery Repair

CNV01 Check / Repair / Clean covers, bimini top, canvas snaps, ect. - Time & Material

CNV02 Inspect and repair cushions and upholstery - Time & Material

Fiberglass Services

FG01 Estimate gel coat / fiberglass damage, scratches and chips (indicate locations) *Limited Availability* - Time & Material

FG02 Faded gel coat restoration: Please estimate

Generator Services

GENEMP Rebuild/replace engine mounted seawater pump - Time & Material

GENFWC Change coolant in generator - Time & Material

GENOIL Oil & filter change (materials additional) in conjunction with winterizing - $150.00

WI17 Winterize Generator (if applicable) - $195.00

Important Information: Engines/systems currently not running will need to be made working at time & material to enable winterization. Key must be supplied for work to commence. $75.00 charge if operational service delayed for no keys present Prices are labor only unless otherwise specified. Labor rate is $200/hr all materials are additional. This form is to be signed and returned with attached signed forms completed.

Winterization: Outboard

Boat Information

If boat is new to Rex, please tell us more so we can assist you better

Outboard Winterization Services

Custom Services